The shunt group enables accurate temperature control of the water coming from a high-temperature main line to a heating network with lower temperature. It can for example be used as a control circuit for a ventilation unit.
The Gebwell shunt group saves installation time because there is no need to build a shunt group on-site using individual components.
The fully encased and insulated shunt group is attached to the wall with brackets supplied with the unit.
The Gebwell shunt group is available in three different models: H, L and U, according to primary circuit connection direction (see gallery below).
The shunt group is available equipped with a 2- or 3-way valve, different pipe sizes, different circulation pumps, different actuators, and with a 0–10 V or 230 V control message system.
Gebwell shunt group includes
- Circulation pump
- Control valve and actuator
- Shut-off valves
- Balancing valves
- Non-return valve
- Wall brackets
- Max operating pressure: 6 bar
- Operating temperature: +2…+110 °C
- Piping material: EN 10217-2 (DN20-80 or EN 10216-2 (DN100 >), pressure vessel steel (P235GH), EN 1.4301 (AISI 304)
Click to enlarge.
Gebwell H shunt group with 2-way valve
Gebwell H shunt group with 3-way valve
Gebwell LL shunt group with 2-way valve
Gebwell LL shunt group with 3-way valve
Gebwell LR shunt group with 2-way valve
Gebwell LR shunt group with 3-way valve
Gebwell U shunt group with 2-way valve DN50
Gebwell U shunt group with 3-way valve DN100